Miyachi LMV1000, Руководство пользователя

Страница: 244 / 259

LMV1000 (G)(E) AIR-COOLED LASER MARKER
990-541 12-1
CHAPTER 12
MAINTENANCE
(1) Before You Start
Safety Precautions
DANGER
Always wear protective goggles when maintaining the Marker. Goggles must have an
optical density of at least 6
+
, at a wavelength of 1064 nanometers for the operation of
the LMV1000(E) & ML-7110A(-CE) Markers, and additional protection at a
wavelength of 532 nanometers for operation of the LMV1000G(E) & ML-9000A
(-CE) Markers.
WARNING
x
Before starting any maintenance procedure, read all of the instructions,
including all caution and warning messages.
x
All Maintenance procedures should be completed by factory trained personnel.
x
Before starting maintenance work, turn the power to the Marker OFF and
disconnect it from input AC power. Wait at least 5 minutes after turning OFF
power before starting work. You may receive an electrical shock if you touch
the interior of the equipment with the power turned
ON
.
x
Keep the exterior of the Marker clean. Do not use paint thinner, benzene or
acetone. Use a dry or slightly dampened cloth or, if heavily soiled, use a cloth
moistened with a mild detergent or alcohol.