Miyachi LMV1000, Руководство пользователя

Страница: 15 / 259

1: SAFETY PRECAUTIONS
LMV1000 (G)(E) AIR-COOLED LASER MARKER
1-6 990-541
x
The Laser Marker will access the memory card for approx. 15 seconds after the USB cable is
disconnected. Do
not turn off the Main Power Switch during this time.
x
Do not turn off the Main Power Switch for at least 15 seconds after changing data (marking data,
system parameters, etc.) through the Operation unit.
x
Do not disconnect the USB cable while the power is supplied. If these cautions are not followed,
the data on memory card may be destroyed. If the data on memory card is destroyed, marking will
not be possible and the laser marker may not power-up correctly.
x
For stable marking, allow the Laser Marker to remain powered up and idle for approximately 10 to
30 minutes.
x
Save the created data periodically. If the memory card develops trouble, the data may be lost and
the laser marker may not start.
Lithium Backup Battery Precautions
WARNING
The battery may explode if it is replaced incorrectly. Always replace
the battery with the same type (or equivalent).
CAUTION
Follow your local environmental regulations for battery disposal
because Lithium Batteries contain dangerous materials.