Miyachi LMV1000, Руководство пользователя

Страница: 207 / 259

8: COMMUNICATION FUNCTION (OPTION)
LMV1000 (G)(E) AIR-COOLED LASER MARKER
8-6 990-541
(5) Commands Details
1.
CUR/CUW (LD current)
Read/Write the LD current value on the Marker.
The minimum setting is 0.1A.
2.
LOR/LOW (LD current offset)
Read/Write the LD current offset on the Marker.
The minimum setting is 1%.
3.
SPR/SPW (Marking speed)
Read/Write the marking speed on the Marker.
The minimum setting is 1mm/s.
4.
PUR/PUW (Q-sw frequency)
Read/Write the Q-sw frequency on the Marker.
The minimum setting is 0.1kHz.
5.
RTR/RTW (Axis rotation angle)
Read/Write the Axis rotation angle on the Marker.
The minimum setting is 0.000001
q
.
6.
XOR/XOW (X-axis offset)
Read/Write the X-axis layout offset on the Marker.
The minimum setting is 1
Ǵ
m.
7.
YOR/YOW (Y-axis offset)
Read/Write the Y-axis layout offset on the Marker.
The minimum setting is 1
Ǵ
m.
8.
LMR/LMW (Laser start)
Read/Write the LD on/off control status.
The setting is 0 for OFF or 1 for ON.
9.
MSR/MSW (Marking start)
Read/Write the marking status.
The setting for reading is 0 for “End” or 1 for “Marking”.
The setting for writing is 0 for “Marking stop” or 1 for “Marking start”.
Writing a “Marking start” command is only effective when in External Control Mode. Writing a
“Marking Stop” command is effective in either control method.