Miyachi LMV1000, Руководство пользователя

Страница: 220 / 259

9: INTERFACE
LMV1000 (G)(E) AIR-COOLED LASER MARKER
990-541 9-5
(2) Extended External Input and Output [EXT. I/O]
Connector: D-Sub 15 pins (Female)
1. Input Signals
Pin No. Signal Name Explanation of Signal
1 +24V output Power source for biasing input signals.
2 1 Start No. Select input, binary code "1".
3 2 Start No. Select input, binary code "2".
4 3 Start No. Select input, binary code "4".
5 4 Start No. Select input, binary code "8".
6 5 Start No. Select input, binary code "16".
7 6 Start No. Select input, binary code "32".
8 7 Start No. Select input, binary code "64".
9 8 Start No. Select input, binary code "128".
10
Start No. Select signal
*1
9 Start No. Select input, binary code "256".
11 Count reset
Closing this pin resets the serial number counter to the
minimum or maximum set value.
12
Serial counter
stop
Closing this pin stops the up/down count on the serial
number counter.
13
External
common
Common terminal (return) for input signals.
15 0V GND for +24V output.
1
This signal is valid only when the Marker is set to Remote on the Operation panel, or
control through the Touch panel or RS-232C communication. This signal is invalid when the
Marker is set to Local mode.