Miyachi LMV1000, Руководство пользователя

Страница: 62 / 259

Operation with the Touch Panel
LMV1000 (G)(E) AIR-COOLED LASER MARKER
990-541 6-15
e. Reverse
Changes the marking order of the characters.
Normal A
ĺ
AB
ĺ
ABC
Reversed
C
ĺ
BC
ĺ
ABC
The marking method for each character does not change even if the marking order is reversed.
f. LD CURR
Sets the LD current. The LD current value is limited by the LD current limit (see Maintenance
Screen ).
g. QSW FREQ
Sets the projecting interval of the laser beam. This has the same functionality as (iii) Frequency
on the
(4) System Set Screen , but this Q-sw frequency value has a higher priority.
h. MKG Speed
Sets the marking speed.
i. Blok No.
Divides a line into several groups, called a ‘block’. Normally, all characters in a line are
marked with the same font. Additionally, these characters and other figures cannot be included
in the same line. When the block is set, however, figures or different fonts can be included in
the same line (see
Input Character String Screen ).
CAUTION for
Layout Details
Screen
‘---’ is displayed for the values that are not
defined. If left undefined, the settings from
the previous line are applied.
If a value is not set in the previous line, the
default values shown on the right will be
used.
The asterisk (
*
) indicates the value defined
on the
System set
screen that will be used.