Mitsubishi Electric C70, Руководство по установке

Страница: 98 / 628

C70 Setup Manual
4.2 Initializing CNC CPU Internal Data (Clearing SRAM Data)
81
4.2.1.2 List of Standard Parameters
The list below shows the standard parameters and their setting values, which are set by setting "1" to "#1060 SETUP".
Some of the servo parameters (#2201-2438) and spindle parameters (#13001-13240) needs resetting in accordance
with motor types after they are automatically set by the above setting.
# No. Name Setting value # No. Name Setting value
1084 RadErr 0.100 3001 slimit1 6000
1169 system name 1 3002 slimit2 6000
1170 M2name B 3003 slimit3 6000
1174 skip_F 100 3004 slimit4 6000
1185 spd_F1 100 3005 smax1 6000
1186 spd_F2 200 3006 smax2 6000
1187 spd_F3 300 3007 smax3 6000
1188 spd_F4 400 3008 smax4 6000
1189 spd_F5 500 3009 ssift1 0
2001 rapid 10000 3010 ssift2 0
2002 clamp 4000 3011 ssift3 0
2003 smgst 0021 3012 ssift4 0
2004 G0tL 100 3013 stap1 6000
2005 G0t1 100 3014 stap2 6000
2006 G0t2 100 3015 stap3 6000
2007 G1tL 30 3016 stap4 6000
2008 G1t1 30 3017 stapt1 500
2009 G1t2 30 3018 stapt2 500
2011 G0back 0 3019 stapt3 500
2012 G1back 0 3020 stapt4 500
2013 OT- 1.000 3021 sori 0
2014 OT+ 1.000 3022 sgear 0
2017 tap_g 15.000 3023 smini 0
2025 G28rap 8000 3024 sout 0
2026 G28crp 500 3025 enc_on 0
2027 G28sft 0 8204 OT-CHECK-N 1.000
2028 grmask 0 8205 OT-CHECK-P 1.000
2029 grspc 10
2037 G53ofs 0