Mitsubishi Electric C70, Руководство по установке

Страница: 565 / 628

Appendix 2 Explanation of Alarms
MITSUBISHI CNC
548
Appendix 2.15.2 Operator Messages
The following messages indicate the status of the setting and display functions‚ and are not operation errors. They are
mainly used to show that operation is normal‚ and serve as guides for the following operations. There is no classification
by numbers.
(1) Search and operation related
(2) MDI/editing related
Message Message details
SEARCH EXECUTION - Search is being executed normally.
SEARCH COMPLETE - Search was completed normally.
Message Message details
MDI NO SETTING - Only display of MDI data (no execution)
MDI SETTING COMPLET - The MDI data setting has been completed (execution is now possible).
MDI ENTRY COMPLETE - The MDI data was saved in the memory with the specified program No.
MDI RUNNING - The NC is operating with an MDI program‚ and the MDI data cannot be corrected.
PUSH KEY SEARCH/PROG
- Status in which no programs to be edited have been called on the editing screen.
To edit‚ press the SEARCH or PROGRAM edit key.
EDITING
- The details of a program are being edited on the screen. Press INPUT to write the
data in the memory.
EDIT (REP.) - The program can be edited on the screen in the replace mode.
EDIT (INS.) - The program can be edited on the screen in the insert mode.
EDIT (CAN
’
T INSERT)
- The data can be inserted no more because of the shortage of space area while
editing the program on the screen with insert mode. Cancel the insertion-impossible
state by moving a cursor and release some data area.
EDIT (CAN
’
T REPLACE)
- The data can be replaced no more since the cursor reached the end of editing area
while editing the program on the screen with replace mode. Cancel the replace-
impossible state by cursor, DEL key, or C•B/CANCEL.
IGNORE CHANGE (Y/N)
- The keys to change the display such as NEXT/BACK page keys, menu change key,
screen change key, or scroll keys, were pressed while editing a program on the
screen.
To cancel the changed contents, select
“
Y
”
.
To leave the changes as they are, select
“
N
”
.
PROGRAM RUNNING
- A machining program to be edited is currently being run with memory operation‚ and
cannot be edited.
DELETE?
- Waiting for a key entry (whether to delete the program) in word edit status (when
the background search menu is selected)
BACK GROUND EDITING - Background edit mode
EDIT POSSIBLE - Editing can be performed in foreground edit mode.
EDIT IMPOSSIBLE
- Editing cannot be performed in foreground edit mode.
- This state also occurs during feed hold or fixed cycle mode (single-block stop).
WORD SEARCH FIN - The word matching the search data was searched on word editing.