Mindray PM-9000, Руководство по эксплуатации

Страница: 49 / 378

Installation and Maintenance
3-7
To generate different signals, you must first select the AUX OUTPUT to
corresponding options. For details, please refer to
4.7 Maintenance
.
NOTE
z
For detailed connection methods of different uses, please consult the
specialist in your hospital, or our Customer Service.
z
The nurse call cable has two non-polarized conducers at the output end.
The installation should be performed by Mindray servicing engineers or
engineers of the hospital according to the specific nurse call system of
the hospital.
WARNING
z
Before defibrillating the patient, the user should ensure the defibrillator
and the monitor have been tested as a system and the two devices can
work together safely and effectively.
3.1.5.7 Connecting to VGA Monitor
This monitor can be connected with a standard color VGA monitor. The VGA
monitor will display the patient waveforms and parameters measured by the patient
monitor. To connect the patient monitor with the VGA monitor, follow the steps as
below.
1. Power off the patient monitor.
2. Connect the signal cable of the VGA monitor to the VGA connector on the rear
panel of the patient monitor.
3. Power on the VGA monitor and then the patient monitor.
NOTE
z
The VGA monitor should be installed at a distance of more than 1.5 m
from the patient.