Mindray PM-9000, Руководство по эксплуатации

Страница: 224 / 378

NIBP Monitoring
13-8
„ SYS ALM LO Determines the lower limit of the systolic pressure.
„
MEAN ALM HI Determines the upper limit of the mean pressure.
„ MEAN ALM LO Determines the lower limit of the mean pressure.
„ DIA ALM HI Determines the upper limit of the diastolic pressure.
„
DIA ALM LO Determines the lower limit of the diastolic pressure.
If a measured pressure crosses a preset upper or lower alarm limit, an alarm will be
triggered. The NIBP alarm limits are as follows:
Patient type Adult Pediatric Neonate
Systolic pressure 40–270 mmHg 40–200 mmHg 40–135 mmHg
Mean pressure 20–235 mmHg 20–165 mmHg 20–110 mmHg
Diastolic pressure 10–215 mmHg 10–150 mmHg 10–100 mmHg
„
DISPLAY WAY 1 GROUP: The NIBP parameter area only displays a group
of NIBP values obtained in the latest measurement.
GROUPS: Multiple groups of measurement values are
displayed at the lower left corner of the screen as shown
below.
NS NM ND PR
DATE TIME
108 84 70 68 2006-6-12 16:06:00
108 80 70 67 2006-6-12 16:11:00
108 80 70 72 2006-6-12 16:16:00
„ UNIT Options: mmHg, kPa;
„ INTERVAL Select MANUAL to set the monitor to manual NIBP
measurement mode, or select from the time options to
determine the interval between automatic measurements.
Optional intervals: 1, 2, 3, 4, 5, 10, 15, 30, 60, 90, 120, 180,
240, and 480MIN.
„ RESET Select this option to restore the initial settings of the
pressure pump. If the monitor fails to give a visual
indication when the pressure pump is working improperly,
selecting this option activates a self-test procedure, and
restores the monitor to normal performance.
„ CONTINUAL Select this option to start a continuous measurement for five
minutes.