Mindray DC-T6, Руководство оператора

Страница: 49 / 347

System Preparation
3-3
2. Be sure to connect this system and its peripheral devices
to wall receptacles, which meet the rated power
requirement written on the nameplate. If adapters or
multifunctional receptacles are used, it may cause the
leakage current to exceed the safety requirement.
In addition, please connect the video printer to the
special power cable in the video printer room of this
system or the special auxiliary power outlet of this
system, and use the cable provided with this system to
connect the printer. Other cables may result in electric
shock.
3.2.2 Powered by Batteries
„ When connected to the external AC power supply, the system is powered by the
external power. The lithium ion batteries inside it are in the charging status.
„
When disconnected from the external power supply, the system is powered by the
lithium ion batteries. Refer to “16 Batteries” for the detailed operations and
precautions.
3.2.3 Equipotential Terminal
The symbol represents the equipotential terminal that is used for balancing the
protective earth potentials between the system and other electrical equipment. For the
equipotential terminal location, please refer to “2.8 Power Supply Panel”.
WARNING:
1. Be sure to connect the equipotential wire before
inserting the power plug into the receptacle; be sure to
remove the power plug from the receptacle before
disconnecting the equipotential wire; otherwise
electric shock may result.
2. When you connect another device to this system, you
should use the equipotential wire to connect each of
equipotential terminals; otherwise electric shock may
result.
3. Connect the earth cable before turning ON the system.
Disconnect the earth cable after turning OFF the
system. Otherwise, electric shock may result.
4. DO NOT connect this system to the outlets with the
same circuit breakers and fuses that control the
current to devices such as life-support systems. If this
system malfunctions and generates over-current, or
when there is an instantaneous current at power ON,
the circuit breakers and fuses of the building’s supply
circuit may be tripped.