Mindray DC-T6, Руководство оператора

Страница: 290 / 347

15-14 Setup
z
Click to add the item in Available Items on the left into Selected Items
on the right.
z
Click to add all items in Available Items on the left into Selected Items
on the right.
z
Click to delete the selected item in Selected Items.
z
Click to clear the content in Selected Item.
5. Click [Up] and [Down] to adjust the sequence of the items in Selected Items.
6. Preset the probe mark of the selected body mark in Selected Items.
Move the cursor onto the probe mark of the body mark in Probe area and press <Set>
to make the cursor turn green. Roll the trackball to change the position of the probe,
rotate the multifunctional knob to change the angle, and press <Set> to confirm the
orientation of the probe.
7. Select the body mark in Selected Items and click [Default], and then the body mark
will be prior to be displayed.
8. Click [OK] to complete the body mark setting.
15.5.2 User-defined Body Marks
If there is no body mark pictogram from the body mark library, you can create a graphic of
your own.
In the Body Mark Preset screen above, click [User-defined] to enter the user-defined body
mark screen (as shown in the figure below).
You can edit, delete, or export a user-defined graphic. In addition, you can create a Body
Mark graphic with a draw tool or add it from loading. The file format is *.Bin.
„ Adding new body mark
Click [Add] to enter the following page.