Mindray DC-T6, Руководство оператора

Страница: 287 / 347

Setup
15-11
z
Click [Up] and [Down] to adjust the sequence of the items in Selected Items.
z Click [Default] to set a selected exam mode as the default exam mode.
3. Click [OK] to confirm the modified setup; or click [Cancel] to cancel the modified
setting.
15.2.2 Exam Configuration
In the Exam Preset screen, click “Exam Config” page tab to enter Exam Config page.
After an exam mode is selected,
„ Click a selection in Application list, you can select a new application for the exam
mode in the popped up drop-down list.
„ Click [Up] and [Down] to adjust the sequence of the items in Selected Items.
„
Click [Rename] to change the name of the user-defined exam mode.[Rename]
„ Click [Copy] to copy the parameters of the selected exam mode. Select a second
exam mode and, click [Paste] to paste the copied parameters to the
secondly-selected exam mode.
„ Click [Export] to open the screen to store the parameters of the selected exam
modes.
„ Click [Load] to open the screen to load the parameters of the exam mode.
„
Click [Export All] to open the screen to store the parameters of all exam modes for the
current probe.
„ In addition, you can preset measurements, comments, body marks and image
parameters for the exam modes by clicking [Measure Preset], [Comment Preset],
[Body Mark Preset], [Image Preset] respectively.
Tips: loading or pasting exam setup data will overwrite previous presets and can't be
reverted. Exercise caution for this operation.