Mindray Ana, Руководство оператора

Страница: 83 / 338

4 Setup
Operator’s Manual 4 - 23
• Setting Default Items: Select an item from the [Selected Items] list, click [Default]. The
defaulted item is marked with a
√ .
To deselect the default tool, select it and click [Default] or set another item as the default.
If a particular item is set as the default item, it automatically displays the submenu of the study
when entering this measurement menu.
• Adjusting Item Positions: Select an item from the [Selected Items], click [Move Up]/[Move
Down].
The order in the list is also the item position in the menu.
User-defined Measurement/Calculation/Study
NOTE:
• Please ensure the correctness and validity of the defined formula, otherwise Mindray will not
be liable for damage caused by improper definition of the formula.
• Trigonometric functions are in degrees, not radians.
• PI is accurate to 7 digits.
• Adding B-Hist or B-Profile to the study is not supported.
• Click [Export Custom] in the measurement preset window to export the user-defined
measurement.
User-defined calculations are derived from arithmetic operations in which the parameters are
measurement, calculation or study results obtained in measurement items which exist in the system
or are user-defined.
Perform the following procedure:
1.
Select the [Measure] tab page.
2. Click [New].
The “Measurement Custom Wizard” dialog box appears, as shown in the following figure.
3. Enter the Name in the “Measurement Custom Wizard” dialog box, then click [Next].
4. Set the user-defined attributes in the dialog box.
5. Click [Complete] to finish setting. The user-defined item is listed in the “Selected Items” menu
and in the “User-defined” category of “Available Items.” An asterisk appears after the user-
defined item for identification.