Mindray Ana, Руководство оператора

Страница: 333 / 338

I EMC Guidance and Manufacturer’s Declaration
Operator’s Manual I - 3
RF emissions
CISPR 11 Class A The Probe is suitable for use in all establishments other
than domestic and those directly connected to the public
low-voltage power supply network that supplies buildings
used for domestic purposes
Harmonic Emissions
IEC 61000-3-2 Class A
Voltage Fluctuations/
Flicker Emissions
IEC 61000-3-3 Compliance
Table I-2
GUIDANCE AND MINDRAY DECLARATION-ELECTROMAGNETIC EMISSIONS
The Probe P7-3Ts/P8-3Ts which integrated in the system is intended for use in the
electromagnetic environment specified below. The customer or the user of system should
assure that it is used in such an environment.
EMISSIONS TEST COMPLIANCE ELECTROMAGNETIC ENVIROMENT - GUIDANCE
Table I-3
GUIDANCE AND MINDRAY DECLARATION-ELECTROMAGNETIC IMMUNITY
The system is intended for use in the electromagnetic environment specified below. The
customer or the user of system should assure that it is used in such an environment.
IMMUNITY TEST IEC 60601
TEST LEVEL
COMPLIANCE LEVEL ELECTROMAGNETIC
ENVIRONMENT-
GUIDANCE
Electrostatic
Discharge(ESD)
IEC 61000-4-2 ±8 kV contact;
±15 kV air ±8 kV contact;
±15 kV air Floors should be wood,
concrete or ceramic tile. If
floors are covered with
synthetic material, the
relative humidity should
be at least 30%.
Electrical fast Transient /
burst
IEC 61000-4-4 ±2 kV for power supply
lines;
±1 kV for input/output
lines ±2 kV for power supply
lines;
±1 kV for input/output
lines Mains power quality
should be that of a typical
commercial or hospital
environment.
Surge
IEC 61000-4-5 ±1 kV line(s) to line(s);
±2 kV line(s) to earth ±1 kV line(s) to line(s);
±2 kV line(s) to earth Mains power quality
should be that of a typical
commercial or hospital
environment.