MIMAKI ML Tiger-1800B MKII, Руководство по эксплуатации

Страница: 30 / 174

2-4
Chapter 2 Outline explanation
6 Feed the media roll. 7-3
7
With the compressor connected to the machine, inject
compressed air into the air shaft. Figure
below
8
Turn on the pneumatic brake system and adjust the pressure with
the regulator.
9 Start the operation of this machine.
10
When printing of the media is completed, stop the machine and
push the check valve, the compressed air will come out of the air
shaft.
11
Release the pressure from the pneumatic brake and vertically
placing the safety chuck in manual mode opens the shaft lock.
12
Push the top of the shaft lock outward, the protected part, shown
in the following figure moves this protection. Figure
below
13 Take out the air shaft along with the empty paper core.
14
Take out the empty paper core and reuse it as necessary to wind
up the printed paper.
End of procedure