MIMAKI ML Tiger-1800B MKII, Руководство по эксплуатации

Страница: 33 / 174

Chapter 2 Outline explanation
2-7
2
2
2
5
6
Carriage
This unit carries the print head and moves it vertically in response to the movement of the belt.
When the belt stops, the unit operates, moves one or more times, and prints the specified image.
The carriage is designed to accommodate 2 print heads in each of 8 independent modules (Print head: up to 16).
Belt cleaning unit
This unit removes belt dust, residue and dirt.
The squeegee blade is made up of a metal part in the lower area and a rubber seal at the tip, removing water generated by
brush operation and cleaning operation.
The water removed by the squeegee blade returns to the collection tank under the brush.
When the belt operation turns off, the tank position lowers. Three pneumatic pistons at the bottom of the tank ascend
during operation and the squeegee blade and brush come into contact with the belt and perform the cleaning operation.
Washing water is discharged from the valve. When maintaining or replacing the brush and squeegee blade, you can slide
out the tank and pull it out.
The tank moves both horizontally and vertically.
The function of a movable squeegee blade is to remove all remaining wash water, as shown below.
• Pictures in this manual are listed as a brief explanation, so it does not necessarily indicate the installed
version. Actually, it may differ from the picture depending on customer's specific request.
Motorized
Tank
Squeegee
blade
Vertical moving
pneumatic piston
Horizontal moving pneumatic
piston
Squeegee blade