MIMAKI ML Tiger-1800B MKII, Руководство по эксплуатации

Страница: 171 / 174

Chapter 9 MAINTENANCE
9-27
1
2
9
4
5
6
MDC System_Error
C9 01 2 C901:00(ZZZZZZZZ)Program ERROR Program ERROR Turn off the power of the
internal PC and then the
main power of the machine in
this order, and then turn on
again after a while.
If it appears again, contact
your local distributor, our
sales office, or service
center.
C9 98 2 C998:00(ZZZZZZZZ)EXCEPTION(1)
Unexpected error
(other than software
exception, below)
C9 99 2 C999:00(ZZZZZZZZ)EXCEPTION(2)
Unexpected error
(software exception)
MDC FW_Error
CA 01 2
CA01:00(ZZZZZZZZ)Calibration Value is Not
Stable
The AD value during
calibration is not stable
for a certain period of
time.
Turn off the power of the
internal PC and then the
main power of the machine in
this order, and then turn on
again after a while.
If it appears again, contact
your local distributor, our
sales office, or service
center.
F5 33 1 Pressing Roller Operated on the Back Side
The pressure roller is
operated from the
operation panel on the
Unwinder side or from
the pressure roller
switch on the back.
1. After finishing the work
you are currently doing,
tap the [Details] button of
[SYSTEM ALARM] in
MPC, and then tap the
[Alarm Clear] button.
2. . If the alarm is displayed
again after tapping the
[Alarm Clear] button, turn
off the power of the built-in
PC and then the printer.
After a while, turn on the
power of the printer and
then the PC
3. If the alarm still appears
even after performing
[Alarm Clear], contact your
local distributor, our sales
office, or the service
center.
Error
No.
Error
level
Error displayed Cause Measures