Chapter 9 MAINTENANCE
9-21
1
2
9
4
5
6
6 1A
2
061A:09(ZZZZZZZZ)INK OVERFLOW
ZZZZZZZZ indicates a path number.
1 : Path 1
2 : Path 2
:
8 : Path 8
Detected sub-tank
sensor Limit.
Air may have been aspirated.
Check the remaining ink level
in the ink tank and execute
[CLEAR ALARM].
If the Alarm appears again,
contact your local distributor,
our sales office, or service
center.
6 1B
2
061B:09(ZZZZZZZZ)INK SUPPLY
ZZZZZZZZ indicates a path number.
1 : Path 1
2 : Path 2
:
8 : Path 8
Ink can not be supplied
to the sub-tank.
Check the remaining ink level
in the ink tank and execute
[CLEAR ALARM].
If the Alarm appears again,
contact your local distributor,
our sales office, or service
center.
6 1C
2
061C:09(________)NEGATIVE PRESS
CONTROL
Abnormal start of
negative pressure
control
Turn off the power of the
internal PC and then the
main power of the machine in
this order, and then turn on
again after a while.
If it appears again, contact
your local distributor, our
sales office, or service
center.
6 1D
2
061D:09(________)NEGATIVE PRESS NOT
ENOUGH
The proper range of
negative pressure can
not be maintained.
6 1E
2
061E:09(________)NEGATIVE PRESS OVER
6 1F
2
061F:09(________)POSITIVE PRESS
CONTROL
Abnormal start of
positive pressure
control
6 20
2
0620:09(________)POSITIVE PRESS NOT
ENOUGH
The proper range of
positive pressure can
not be maintained.
6 21
2
0621:09(________)POSITIVE PRESS OVER
6 37
2
0637:09(______ZZ)INK LEAK
ZZ indicates an ink leak sensor.
1 : Supply unit right side Ink leak Sensor
2 : Supply unit left side Ink leak sensor
Ink leakage occurred
near the ink tank.
6 5D
2
065D:09(______ZZ)Overflowtank
ZZ indicates the chamber bottle.
1 : Chamber bottles for paths 1 to 4
2 : Chamber bottles for paths 5 to 8
Ink has entered the air
tank.
6 6B
2
066B:09(ZZZZZZZZ)SUBTANK EMPTY
ZZZZZZZZ indicates a path number.
1 : Path 1
2 : Path 2
:
8 : Path 8
There is no ink in the
sub-tank.
Check the remaining ink level
in the ink tank and execute
[CLEAR ALARM].
If the Alarm appears again,
contact your local distributor,
our sales office, or service
center.
6 6D
1
066D:09(_______1)INKTANK PULL OUT
Ink tank tray is pulled
out.
Return the ink tank tray.
Execute [CLEAR ALARM]
after returning the ink tank
tray.
6 77
0
0677:09(________)DEGAS CONTROL
An abnormality was
detected in the
degassing control.
Turn off the power of the
internal PC and then the
main power of the machine in
this order, and then turn on
again after a while.
If it appears again, contact
your local distributor, our
sales office, or service
center.
Error
No.
Error
level
Error displayed
Cause
Measures
Содержание ML Tiger-1800B MKII
