MIMAKI ML Tiger-1800B MKII, Руководство по эксплуатации

Страница: 10 / 174

Chapter 1 Introduction
1-4
Below is a description of each item.
Below are definitions of terms used in this manual.
Order- and information-related request
For copies of this manual or information on manual related, service related, technical support, spare parts, please contact
your local distributor, our sales office, or service center.
Limitations of warranty
Unless there is a specific agreement on the contract, Mimaki shall use it for the normal operation of this machine (only if it
is used in accordance with the instructions stated in this manual and maintenance manual), to manufacture this machine
we guarantee the compliance of the machine against the quality of the material and the technical features described in this
document.
Mimaki's warranty is not a replacement or addition of the parts warranty used by Mimaki during the manufacture of this
machine. Therefore, the parts maker's warranty will be effective for these parts.
The warranty is no longer valid in the following conditions:
• Use of materials not indicated in the technical specifications, in particular, non-observance of the maximum weight and
diameter of media rolls.
• Do not perform scheduled lubrication work.
• Do not follow instructions.
• Do not follow maintenance rules.
• Repair of workers not approved by Mimaki.
• Inappropriate repair (use spare parts other than original).
Note: It is strictly forbidden to the customer and / or third parties (except authorized employees of Mimaki) to make
changes of any kind and size on the machine and its functions, and to this manual.
Table Column data
S (Step) It identifies the step.
Mode
There are the following modes.
Manual
Require to press a pushbutton or a function key
Use visual control operation or measuring equipment
Operations automatically executed by this machine (AUT.)
Key
Indicates the key (or the icon on the operator panel) for performing a specific operation. The
relevant keyboard and reference number (such as P01 No.3) are also indicated.
Indication
Descriptions on the panel or descriptions of function keys. In automatic mode it indicates the
operating block enabled.
Operation
This is an explanation of the operation performed by the operator or the operation that is
executed periodically automatically.
Reference It represents a reference page or figure.
Table Definition
Dangerous zone
The inside and peripheral area of this machine. If there is a person inside, its safety and health
hazards arise.
Operator A worker who operates, adjusts, periodically maintains or cleans this machine.
Maintenance worker Mimaki's approved technician who can install, repair, and regular or special maintenance work.
Mimaki's technician Mimaki's maintenance worker performing complicated operations and specific operations
MIMAKI ENGINEERING CO.,LTD.
2182-3 Shigeno-otsu, Tomi-shi, Nagano 389-0512 JAPAN