MIMAKI ML Tiger-1800B MKII, Руководство по эксплуатации

Страница: 44 / 174

4-4
Chapter 4 Installation
Lifting Procedure
We recommend using a bridge crane with appropriate characteristics when lifting the main parts of this machine.
When lifting the packing containing the accessories, use a forklift.
The lifting rope of this machine needs the characteristics shown in the figure and must be arranged as shown.
Before lifting the machine, make sure that the balance is secured and, if necessary, adjust the rope so that the balance is
perfect.
Also, check whether the parts are damaged by contact or rubbing of the lifting rope with this machine.
The machine is equipped with wheels which allow to move it easily inside the operational unit.
When lifting parts of this machine, please check the following figures.
To lift the assembled wire, you can loosen the screw fixing the two rollers and then lift it.
You can hoist the printer by using the appropriate lifting cable and hooking the cable to the hook shown in the figure below.
The position of the hook is held by a special metal tie rod (yellow).
• When installing, check whether the machine is damaged during transportation.
• Make sure that lifting work does not affect this machine.
• To prevent deformation and damage of the machine, never use parts and accessories other than those
instructed for lifting work.
• Because the photos in this book are posted as mere descriptions, they do not necessarily indicate the
installed version. Actually, it may differ from the photo depending on the specific request by the final
customer.