MIMAKI ML Tiger-1800B MKII, Руководство по эксплуатации

Страница: 124 / 174

Chapter 7 Operation, Adjustment, and Maintenance
7-4
Printer
Pause
To temporarily stop the unit, follow the procedure below.
Long-term Suspension
To stop the machine during the holiday period and beyond 24 hours, follow the procedure below.
Procedure Start of printer operation
S Mode Key Indication Operation Reference
1
media LOAD -
UNLOAD
Load the media roll to the air shaft. 2-2
2 Make sure the media is passing correctly. 7-3
3
Press [start] to start working on the printer. You can
operate with the operator panel.
4
The operator manages whether the operation is
performed properly.
5
After the printing and media taking-up, the operator
unload the media roll.
End of procedure
Procedure Pause
S Mode Key Indication Operation Reference
1
The operator stops the machine with the operator
panel.
2 Confirm stop of this machine.
3 PEM EMERGENCY
In case of emergency, press any emergency switch on
this machine to stop.
5-4
End of procedure
• We recommend that you stop the machine before the printed material comes to an end so as not to fail
the collection of the media.
Procedure Extended stop
S Mode Key Indication Operation Reference
1
Shut down the PC from touch panel [System] >
[Power] > [Shutdown PC].
6-64
2
3
[GENERAL
SWITCH]
0 - 1
Set the main switch position on the front side of the
electrical box to 0 to turn off the voltage.
5-2
End of procedure
• Inform Mimaki beforehand if you stop the machine for more than 2 days. Mimaki maintenance workers
need to carry out long-term preservation treatment of the head.