MIMAKI ML Tiger-1800B MKII, Руководство по эксплуатации

Страница: 133 / 174

Chapter 7 Operation, Adjustment, and Maintenance
7-13
7
2
3
4
5
6
Replacing Ink Tank

If "INK NEAR END" is displayed on touch panel
the ink level is low. Although you can continue printing, there is a risk that ink will run out during printing. We
recommend that you replace the ink tank as soon as possible.

If "INK END" is displayed on touch panel
replace with a new ink tank.
1
Open the door on the right side of the main unit
2
Pull out the ink tank tray toward you
• Pull out the ink tank tray slowly until it hits the front.
• The sensor detects the operation of pulling out the ink tank tray, "ERROR 66D Inktank pull out" is displayed on
touch panel, and the operation of supply and circulation temporarily stops.
3
Shake the unopened new ink tank slowly right and left more than 20 times
• Wear gloves and shake the ink bottle to left and right more than 20 times while holding the lid of the bottle so
that the ink flows slowly, in order for the ink not to be leaked when during shaking.
• Always wear gloves and safety glasses when replacing any ink tank.
• Be sure to pull out the ink tank tray.
• If an ink tank is replaced without pulling out the ink tank tray, the operation of supply and circulation will
not stop, and it possibly leads to damage to parts or ink leakage.
• Do it carefully because it may cause ink leak if shaking too strongly.
Door
Ink tank tray