MIMAKI ML Tiger-1800B MKII, Руководство по эксплуатации

Страница: 151 / 174

Chapter 9 MAINTENANCE
9-7
1
2
9
4
5
6
F457 3
Carriage sensor
UP position Alarm Carriage height sensor
error 1. Tap the [DETAIL] button in [SYSTEM ALARM], and
tap the [CLEAR ALARM] button.
2. If the alarm appears again even after tapping the
[Alarm Clear] button, turn off the power of the built-in
PC and then the printer. After a while, turn on the
power of the printer and then the PC.
3. If the Alarm appears again, contact your local
distributor, our sales office, or service center.
F458 3
Carriage Up Motor
Alarm
Carriage up/down
motor error
F459 3
Carriage Down
Motor Alarm
F460 3
Carriage Homing
sensor Alarm Carriage initial position
check error
F461 3
Motors Thermic
Alarm Motor or power breaker
error
F462 3
Washing device in
maintenance
position (FC S27.1)
Washing unit error
1. Take the washing unit in and out, and tap the
[DETAIL] button in [SYSTEM ALARM], and then tap
the [CLEAR ALARM] button to check whether the
error can be reset.
2. If the alarm appears again even after tapping the
[Alarm Clear] button, turn off the power of the built-in
PC and then the printer. After a while, turn on the
power of the printer and then the PC.
3. If the Alarm appears again, contact your local
distributor, our sales office, or service center.
F463 3
Cleaning Station
sensors Alarm Cleaning station sensor
error 1. Tap the [DETAIL] button in [SYSTEM ALARM], and
tap the [CLEAR ALARM] button.
2. If the alarm appears again even after tapping the
[Alarm Clear] button, turn off the power of the built-in
PC and then the printer. After a while, turn on the
power of the printer and then the PC.
3. If the Alarm appears again, contact your local
distributor, our sales office, or service center.
F464 3
Cleaning Station
Forward motor
Alarm
Cleaning station motor
error
F465 3
Cleaning Station
Backwards motor
Alarm
F466 1
Cleaning Solution
LOW level Alarm
Error of the remaining
amount of cleaning
solution
1. Check the remaining amount of cleaning solution.
2. Add the cleaning solution if necessary.
3. Tap the [DETAIL] button in [SYSTEM ALARM], and
tap the [CLEAR ALARM] button.
4. If the alarm appears again even after tapping the
[Alarm Clear] button, turn off the power of the built-in
PC and then the printer. After a while, turn on the
power of the printer and then the PC.
5. If the Alarm appears again, contact your local
distributor, our sales office, or service center.
F467 2
Muting - Printing
AREA doors
The cover sensor
detection exclusion key
is on.
1. Turn Off the “EXCLUSION SAFETY DOOR” key on
the right front side of the machine.
2. Tap the [DETAIL] button in [SYSTEM ALARM], and
tap the [CLEAR ALARM] button.
3. If the alarm appears again even after tapping the
[Alarm Clear] button, turn off the power of the built-in
PC and then the printer. After a while, turn on the
power of the printer and then the PC.
4. If the Alarm appears again, contact your local
distributor, our sales office, or service center.
F468 2
Compressed Air
LOW pressure
Alarm
Air pressure error
1. Check the air pressure supplied to the machine.
Required pressure: 6 to 8 bar
2. After checking, tap the [DETAIL] button in [SYSTEM
ALARM], and tap the [CLEAR ALARM] button.
3. If the alarm appears again even after tapping the
[Alarm Clear] button, turn off the power of the built-in
PC and then the printer. After a while, turn on the
power of the printer and then the PC.
4. If the Alarm appears again, contact your local
distributor, our sales office, or service center.
Error
No.
Error
level
Error displayed Cause Measures