MIMAKI ML Tiger-1800B MKII, Руководство по эксплуатации

Страница: 52 / 174

5-2
Chapter 5 Push Button Panel
Work Station
The machine has one PC monitor and four push-button-panels, as shown in the figure below.
Operation
The operator should stay close to the PC monitor or the button when operating this machine (especially in the following
cases).
• Activate the machine with push button
• Confirmation of operation of this machine
• Feed the media roll
Main power supply switch
The main power supply switch is in the electrical box. Except for the upstream area of the main power switch, turn on and
off the voltage to each part of the electric panel.
To activate the device, turn the position of the knob to [I] (corresponding to voltage application).
If you need to open the cabinet door, set the knob position to [0].
You can lock the knob so that someone who does not own the key can not use the machine.
The use of this machine with the guard removed is the responsibility of the maintenance workers themselves.
Maintenance workers prohibit others from entering during working. After completing work, confirm that the machine is
returned to the normal safe state, and then leave the operation to the machine operator.
PEM
P01
PC Monitor
P02
PEM