MIMAKI ML Tiger-1800B MKII, Руководство по эксплуатации

Страница: 14 / 174

Chapter 1 Introduction
1-8
Safety indications
Safety is secured under normal operating conditions. However, in order to further improve the level of safety at work, it is
recommended that operators should adopt an attitude of security alert.
In particular, please take the following preventive measures.
• Carefully read the operation procedure described in this manual before the start-up operation, maintenance or any
other operations of this machine.
• Strictly follow this information and all safety and warning information stated on the safety sign attached directly to the
machine.
• The operator must fulfill all the usage requirements of the machine.
• Protective devices for the operator’s safety must be installed and made operational.
• In particular, before starting up the machine for each work shift, make sure that the protective guard is correctly posi-
tioned, the safety device is operating properly, and the on-board equipment is correctly installed and operating.
• Be sure to use the individual protective devices required by safety regulations during work.
• Do not wear bracelets, rings, necklaces, etc. as there is a possibility of serious injury. Before starting work, remove any
potential danger.
• Before starting the installation, check whether there is any dangerous situation at the installation site and check that
there are no foreign matters inside the machine or on this machine.
• Execute the startup sequence of this machine exactly as recommended.
• Do not approach the operation area of this machine during operation.
• Do not place your hand near or in the moving parts or charging parts of this machine or in the electrical box.
• Do not work in a dark place. Use all available lighting and work properly (over 300 lux).
• Refrain from using this machine in the state of ingesting medicines and drinks that may lead to the slowing of move-
ment and thinking.
• Before doing anything, work on all preventive measures and take them.
• Do not leave the machine unattended when in use.
• Make sure that the entire work area is clearly visible.
• Always keep the work area clean.
• If there is any abnormality in the operation of the on-board equipment, notify our maintenance person.
• Avoid loose clothing and wear protective clothing.
Safety during maintenance
• Maintenance operation must be carried out by qualified personnel.
• Before performing any maintenance or lubrication work, stop the machine using the procedures described in this man-
ual.
• When removing and installing components using lift, check the load capacity of the lift.
• Quickly transfer the load to the support and the stand after lifting.
• Do not try to climb up or descend from the machine while it is up and running.
• Never use gasoline, solvents or flammable liquids to clean the parts. Use a commercial nonflammable non-toxic deter-
gent.
• If repair or maintenance at places not reachable from the ground or floor is necessary, follow the regulations of each
country and region, use a ladder or an elevating step platform.
• Perform all maintenance and repair carefully as described in this manual.
• Be sure to use personal protective equipment.
• Use a power tool that complies with the current safety standards.
• Before starting the machine, make sure that no one is carrying out maintenance operations.
• Do not work under or near the operating area of this machine if support and fixation are insufficient.
• Wear safety glasses with side shields.
• Operate this machine according to intended use conditions.
• The use of this machine must comply with the current safety standards of the country or region to be used.
• The owner of the machine is responsible for maintaining it in a state where the safety is securely ensured.
• The owner of this machine must review this machine at intervals suitable for the operating conditions.
• Avoid loose clothing and wear protective clothing.
• The owner is responsible for the disclosure of this manual to all operators who operate this machine.