Meco Pellematic PES 12-20, Руководство по установке

Страница: 57 / 102

Starting up for the first time
57
12.1.2 Adjusting the boiler controller
The boiler controller must be adjusted to match the changed boiler power rating.
Parameter level 200
Open the menu Pellematic at the operating device. Parameter level 200 is exclusively for customer service technicians
and MEco employees. You access parameter level 200 by entering the code in parameter P199. The code for parameter
level 200 is the sum of day plus hour, e.g. : Day:
26 / 08/ 2009 and hour: 14 :30:47; (26 + 14 = 40) results in the code: 26
+ 14 = 40.
Then go to parameter 265 and adjust the boiler power rating
Para-
meter Display on screen Description Adjus
table Factory
setting
P265 Power level
P265: level 15 Adjusting the boiler power rating yes 15/25/36
Note:
The setting for parameter 265 is the factory setting for the boiler power rating
12.2 Settings in the boiler controller
Parameters that you must adjust to the relevant boiler type.
P265 Adjusting the boiler power rating
P263
Setting the boiler setpoint temperature, default 175°F
P202 Setting the switch-off temperature, default 185°F
P212 Activating the de-ashing system, if installed
P270
Activating the flame sensor, if installed (optional)
P213 Activating the level detection system, if weighting cells are installed (optional)
PE 3671 USA 2.3 Installation Manual PES 36–56