Lighthouse SOLAIR 1100LD, Руководство по эксплуатации

Страница: 103 / 188

Operate SOLAIR
248083395-1 Rev 9 6-39
One Second Realtime Modbus Output
If One Second Real-time MODBUS Output is enabled, the instrument’s
settings reset to the following.
Note:
Alarming is not
available when One
Second Real-time
MODBUS Output is
enabled.
• Mode: AUTO
• Cycles: Zero
• Sample Time: One second
Note:
If any setting (mode,
sample time, hold time, etc.)
is changed, the One Second
Real-time MODBUS Output
mode will be automatically
disabled.
• Hold Time: Zero seconds
• Cumulative/Differential: Cumulative (CUML)
• Raw/Normalized: Raw
When counting, the MAIN Screen will update continuously and data
will not be recorded to the data buffer.
Pump Startup
This is ON by default and sets a pump ramp up time at the beginning of
the first sample, or at the beginning of all samples if the HOLD time is
greater than one minute, to stabilize the laser and air flow. This setting
should be left in the default mode unless special applications, such as
“surface scans”, require it to be disabled.