Lighthouse SOLAIR 1100LD, Руководство по эксплуатации

Страница: 155 / 188

00
248083395-1 Rev 9 8-1
8
Maintenance
Procedures
Introduction
This chapter provides instructions for routine maintenance that may be
required for the SOLAIR particle counter.
The maintenance procedures described in this chapter are not required
on regular or prescribed intervals and should be performed only if the
Service Wrench icon is displayed on the MAIN screen, or the user has
been requested to do so by Lighthouse Technical Support personnel or
the users has reason to question the data they are receiving from the
instrument. External cleaning may be performed as needed, per
customer SOPs (Standard Operating Procedure). Review “Routine
Cleaning” on page 8-1 before starting. Review “Safety
Considerations” on page 1-1 and “Installation” on page 3-5 before
replacing the battery or power cord.
Safety
Before performing any of the maintenance tasks described in this
chapter, read Chapter 1 and Chapter 3 of this manual and become
familiar with the warnings and caution labels discussed throughout this
manual.
Maintenance
Routine Cleaning
Routine cleaning of the instrument is not required but may be done
using a mild soap and water solution, Windex or isopropyl alcohol but
the solutions must not be allowed to enter the interior of the instrument
nor the Inlet Port. No other cleaning solutions or chemicals may be
used. Failure to adhere to this restriction will void the warranty.
Calibration
To maintain optimum performance of this instrument, it should be
recalibrated annually by a Lighthouse Authorized Service Provider.