Lighthouse SOLAIR 1100LD, Руководство по эксплуатации

Страница: 43 / 188

Set up the Counter
248083395-1 Rev 9 4-9
EU GMP 2009
The SOLAIR 1100 supports the EU GMP 2009. This standard applies
only to 0.5
—
and 5.0
—
channel sizes. If either one of these channel sizes
is not present, the report cannot classify the room.
There are only 4 Grades: A, B, C, D, and 2 cleanroom states: At Rest
and In Operation.
The standard defines a minimum sample size of one cubic meter for the
Grade A cleanroom and refers to ISO standards for the rest of the
grades. In order to take a measurement, at least one location and one
sample are required by the counter. The volume of air must be shown
in liters.
The classification for a particle size is determined based on the mean of
all average concentrations taken from all locations in the cleanroom. If
the mean exceeds all limits, the classification is “Out of Range”.
The counter will only print channel sizes of 0.5 and 5.0 in this report.
Ethernet
Configuration
The SOLAIR 1100LD comes pre-
configured to use DHCP and receive an IP
address automatically. If this is not a
desired configuration, use this section to
change these settings.
If the reader does not understand these
terms or the possible impact of changing
the SOLAIR’s settings, do NOT proceed
without contacting the facility IT personnel.
The following procedure requires pre-
approval and planning by the IT
department and a joint setup effort.