Lighthouse SOLAIR 1100LD, Руководство по эксплуатации

Страница: 124 / 188

Lighthouse SOLAIR 1100LD Operating Manual
6-60 248083395-1 Rev 9
The UCL calculation will be printed for each channel size if the
number of locations in the range is 2 through 9. The calculation will
only print if the Format settings (Setting screen) are set to CUML and
NORM. Any other format settings or locations less than 2 and greater
than 9 will print N/A for each channel.
View the same data in different formats just by changing the Particle
Display options in the Sample Setting screen in CONFIGURATION.
Note:
Whatever is set up
in the Configuration menu
will display in the Data
View Buffer and on the
printout.
The Summary of the data can be viewed in the following combinations:
• Raw Counts, Differential Data
• Raw Counts, Cumulative Data
• Normalized Counts, Differential Data, Particles/ft
3
• Normalized Counts, Differential Data, Particles/m
3
• Normalized Counts, Cumulative Data, Particles/ft
3
• Normalized Counts, Cumulative Data, Particles/m
3
The following sections describe printing options available from the
Data View Buffer (Data) screen:
Print Record
When the user presses the PRINT RECORD button, whatever record
is currently displayed on the Data View Buffer screen will print as a
single sample record. The record will print according to the settings in
the Print Configuration.
Print Range
Note:
Print Reverse
does not apply to printing a
range of data.
• To print a range of data from the buffer, first use the arrows on the
Data screen to scroll to the first record to be included in the range.
The printout will start with the record that is displayed on the Data
screen.
• Determine how many records to print. Using the arrows to scroll up
and down will help but make sure the screen displays the starting
record before proceeding to the next step.
• Press the RANGE button. The Print Range screen displays as
shown in Figure 6-82.