Lighthouse SOLAIR 1100LD, Руководство по эксплуатации

Страница: 83 / 188

Operate SOLAIR
248083395-1 Rev 9 6-19
Press the far left column at the screen shown in Figure 6-27 to enable or
disable the channel. When enabled, the channel label appears. Channels
must be enabled before their data will be stored in memory.
Figure 6-27 Analog Settings Screen
Press the top row, second column to enter TYPE data. The example
shown in Figure 6-28 illustrates entering a temperature probe type.
Examples of types would be TEMP, RH, AIRV or AV and DP. Keep in
mind that the ’type’ applies to the channel being configured, as
discussed earlier in this section.
Use the ERASE button to erase one character at a time and the ENTER
to accept the value. The BACK button will return to the previous screen
without making any changes.
Figure 6-28 Analog Types Screen
TEMP