Lighthouse SOLAIR 1100LD, Руководство по эксплуатации

Страница: 28 / 188

Lighthouse SOLAIR 1100LD Operating Manual
3-8 248083395-1 Rev 9
WARNING: If the AC power cord needs to be replaced,
replace it only with a cord having as good as or better rating
than the cord provided by Lighthouse Worldwide Solutions.
Attempting to use an under-rated cord can expose the
instrument power supply, adjacent equipment or the user to
dangerous shock and fire hazards. Replace the batteries
only with those supplied by Lighthouse Worldwide
Solutions to eliminate the danger of battery overload, which
can result in fire or explosion hazard. Failure to heed this
warning can result in personal injury or death.
Remove the Batteries
1. To remove the batteries, turn the power switch OFF (out/flush) then
remove power cord from its receptacle.
WARNING:
Always
remove the battery prior
to shipping the
instrument.
2. Gently place the SOLAIR on its side and open the battery door.
Either pull on the ribbon (for single battery units) or disconnect the
cables and remove each battery individually (for dual-battery
units). Close and lock the battery door. See Figures 3-8 and 3-9.
Do NOT drop the batteries as this can cause an explosion or fire
hazard.
Figure 3-8 Removing Battery (Single-Battery Units)