Lighthouse SOLAIR 1100LD, Руководство по эксплуатации

Страница: 118 / 188

Lighthouse SOLAIR 1100LD Operating Manual
6-54 248083395-1 Rev 9
The following options can be enabled to configure locations for the
SOLAIR.
• When enabled, the Auto Increment option will automatically select
the next location after completing the programmed number of
cycles. The default position is “off” when the unit is powered up.
• The unit can be configured for a maximum of 200 Locations. Each
location name can be configured with a maximum of 8 characters
per name.
• Recipes associated with a specific location are denoted by an
asterisk (*) to the right of the location name.
• When selecting a location with a recipe, the user is provided with
the option of loading the recipe as shown in Figure 6-77. If the user
chooses not to load the recipe, the location can still be used with the
current settings.
Figure 6-77 Location - Load Recipe
• If a recipe is loaded and a location is selected that is not associated
with a recipe, the user is given the option to unload the current
recipe. If the user chooses to keep the loaded recipe, the location
will adopt the current recipe settings.
To create a name for a location, press the EDIT button to display the
Edit screen shown in Figure 6-78.