Lighthouse SOLAIR 1100LD, Руководство по эксплуатации

Страница: 121 / 188

Operate SOLAIR
248083395-1 Rev 9 6-57
Data View
Buffer Screen
Data stored on the instrument is viewed in the Data View Buffer. New
records overwrite the first records stored after the buffer fills to its limit
(3000 records). An asterisk (*) next to the word “Records” on the
MAIN screen indicates the Buffer is full and data has wrapped. The
first record shown in the Data View Buffer after data has wrapped will
be the most current record and not the first record stored. In this case,
older data will be lost if it hasn’t been printed or transferred to a PC or
management system.
Particle concentration data displays and prints in ft
3
if the Particle
Volume is set to ft
3
. If the Particle Volume is set to m
3
or Liters, data
displays and prints in m
3
.
Press the DATA button on the MAIN screen to display the Data View
Buffer.
Depending on the sample setting configuration, the data displays in
either RAW data mode as shown in Figure 6-80 or NORMALIZED to
ft
3
or m
3
as shown in Figure 6-81.
Figure 6-80 Data Screen - RAW Data