Leuze electronic BCL 248i, Руководство по эксплуатации

Страница: 91 / 142

Starting up the device - Configuration
Leuze electronic GmbH + Co. KG BCL 248i 91
8.12.6 Module 71 – Switching output SWO2
PROFINET-IO module identifier
Module ID: 1071
Submodule ID: 1
NOTICE
Module 71 functions only as a switching output.
Parameter
Tab. 8.41: Parameters for module 71
Parameter Description Addr. Data type Value range Default
Bias level The parameter defines the bias level
of the switching output and, thus, si-
multaneously whether the output is
low-active (0) or high-active (1). 0.1 Bit 0: LOW (0 V)
1: HIGH
(+Ub)
0
Reserved Free 0.2 …
0.7
Start-up delay With this parameter, the output pulse
may be delayed by a set time period
in ms 1 UN-
SIGNED16 0 … 65535
ms 0 ms
Switch-on time The parameter defines the switch-on
time period for the switching output
in ms. If the value is 0, the signal is
static. 3 UN-
SIGNED16 0 … 1300 ms 400 ms
Switch-on func-
tion 1 This parameter specifies an event
which can set the switching output. 5 UNSIGNED8 see chapter
8.12.3
"Switch-on
and switch-
off functions
for operation
as an output"
5
Switch-on func-
tion 2 This parameter specifies an event
which can set the switching output.
Switch-on function 1 and switch-on
function 2 are OR linked. 6 UNSIGNED8 see chapter
8.12.3
"Switch-on
and switch-
off functions
for operation
as an output"
0
Switch-off func-
tion 1 This parameter specifies an event
which can reset the switching output. 7 UNSIGNED8 see chapter
8.12.3
"Switch-on
and switch-
off functions
for operation
as an output"
1
Switch-off func-
tion 2 This parameter specifies an event
which can reset the switching output.
Switch-off function 1 and switch-off
function 2 are OR linked. 8 UNSIGNED8 see chapter
8.12.3
"Switch-on
and switch-
off functions
for operation
as an output"
0