Leuze electronic BCL 248i, Руководство по эксплуатации

Страница: 50 / 142

Starting up the device - Configuration
Leuze electronic GmbH + Co. KG BCL 248i 50
Parameter Description Address Data type Value range Default
Check digit
method 2 Used check digit procedure 16.0 … 1
6.6 BitArea 0: Standard check
digit evaluation
1: No check digit ver-
ification
2: MOD10 Weight 3
3: MOD10 Weight2
4: MOD10 Weight
4…9
5: MOD11 Cont
6: MOD43
7: MOD16
0
Check digit
output 2 Turns the check digit output
on or off. 16.7 Bit Check digit output
0: Standard
1: Not standard
0
Code type 3 See code type 1 17.0 … 1
7.5 BitArea See code type 1 0
Number of
digits mode 3 Specifies how the subse-
quent numbers of digits are
to be interpreted. 18.6 Bit 0: Enumeration
1 : Range
0
Number of
digits 3.1 Decodable number of digits;
in the case of a range, this
number defines the lower
limit. 18.0 … 1
8.5 UNSIGNED8 0 … 63 0
Number of
digits 3.2 Decodable number of digits;
in the case of a range, this
number defines the upper
limit. 19 UNSIGNED8 0 … 63 0
Number of
digits 3.3 Decodable number of digits
in the
enumeration mode.
20 UNSIGNED8 0 … 63 0
Number of
digits 3.4 Decodable number of digits
in the
enumeration mode.
21 UNSIGNED8 0 … 63 0
Number of
digits 3.5 Decodable number of digits
in the
enumeration mode.
22 UNSIGNED8 0 … 63 0
Reading reli-
ability 3 Min. reading reliability to be
achieved in order to output a
read code. 23 UNSIGNED8 1 … 100 4
Check digit
method 3 Used check digit procedure 24.0 … 2
4.6 BitArea 0: Standard check
digit evaluation
1: No check digit ver-
ification
2: MOD10 Weight 3
3: MOD10 Weight2
4: MOD10 Weight
4…9
5: MOD11 Cont
6: MOD43
7: MOD16
0