Fast commissioning
Leuze electronic GmbH + Co. KG
BCL 248i
14
3.4.6
Setting the device name – device naming
PROFINET-IO defines the "naming of the device" as the creation of a name-based relationship for a
PROFINET-IO device.
Assigning the device name to the configured IO devices
Ä
Select the respective BCL 248i bar code reader for the "device naming" based on its MAC address.
ð
This participant is assigned the unique "device name." This must match the device name in the HW
config and must not be longer than 255 characters.
Fig. 3.3:
Assigning the device names to the configured IO devices
NOTICE
Multiple BCL 248i can be distinguished by the MAC addresses displayed. The MAC address
may be found on the name plate of the respective bar code reader.
Assignment of MAC address – IP address – individual device name
Ä
Assign an IP address (suggested by the PLC), a subnet mask and, if required, a router address, and
assign this data to the named participant ("device name").
ð
From now on, and when programming, only the unique "device name" is used.
