Leuze electronic BCL 248i, Руководство по эксплуатации

Страница: 67 / 142

Starting up the device - Configuration
Leuze electronic GmbH + Co. KG BCL 248i 67
8.8.2 Modules 21-29 – Decoding result
PROFINET-IO module identifier
Module ID: 1021…1029
Submodule ID: 1
Description
The module defines the transfer of the actually decoded reading results. The data is transmitted consis-
tently over the entire range.
Parameter
None
Input data
Tab. 8.15: Input data for modules 21 … 27
Module
no. Input data Description Addr
. Data
type Value
range Initial
value
21 … 29 Reading gate
state The signal indicates the current
state of the reading gate.
Attention: This does not neces-
sarily correspond to the state at
the time the bar code is scanned.
0.0 Bit 0: Off
1: On
0
21 … 29 New result Signal indicates whether a new
decoding result is present. 0.1 Bit 0: No
1: Yes
0
21 … 29 Result state Signal indicates whether the bar
code has been read successfully. 0.2 Bit 0: Success-
ful reading
1: NOREAD
0
21 … 29 Further results in
the buffer Signal indicates whether further
results are in the buffer. 0.3 Bit 0: No
1: Yes
0
21 … 29 Buffer overflow Signal indicates that result buffers
are occupied and the decoder re-
jects data. 0.4 Bit 0: No
1: Yes
0
21 … 29 New result Toggle bit indicates that a new de-
coding result is present. 0.5 Bit 0 > 1: New
result
1 > 0: New
result
0
21 … 29 Result state Toggle bit indicates that the bar
code has not been read. 0.6 Bit 0 > 1:
NOREAD
1 > 0:
NOREAD
0
21 … 29 Waiting for ac-
knowledgment This signal represents the internal
state of the control. 0.7 Bit 0: Base
state
1: Control
waiting for
acknowl-
edgment
from the IO
controller
=