Leuze electronic BCL 248i, Руководство по эксплуатации

Страница: 49 / 142

Starting up the device - Configuration
Leuze electronic GmbH + Co. KG BCL 248i 49
Parameter Description Address Data type Value range Default
Number of
digits 4 Decodable number of digits
in the
enumeration mode.
5 UNSIGNED8 0 … 63 0
Number of
digits 5 Decodable number of digits
in the
enumeration mode.
6 UNSIGNED8 0 … 63 0
Reading reli-
ability Min. reading reliability to be
achieved in order to output a
read code. 7 UNSIGNED8 1 … 100 4
Check digit
method Used check digit procedure 8.0 … 8.6 BitArea 0: Standard check
digit evaluation
1: No check digit ver-
ification
2: MOD10 Weight 3
3: MOD10 Weight2
4: MOD10 Weight
4…9
5: MOD11 Cont
6: MOD43
7: MOD16
0
Check digit
output Turns the check digit output
on or off. 8.7 Bit Check digit output
0: Standard
1: Not standard
0
Code type 2 See code type 1 9.0 … 9.5 BitArea See code type 1 0
Number of
digits mode 2 Specifies how the subse-
quent numbers of digits are
to be interpreted. 10.6 Bit 0: Enumeration
1 : Range
0
Number of
digits 2.1 Decodable number of digits;
in the case of a range, this
number defines the lower
limit. 10.0 … 1
0.5 UNSIGNED8 0 … 63 0
Number of
digits 2.2 Decodable number of digits;
in the case of a range, this
number defines the upper
limit. 11 UNSIGNED8 0 … 63 0
Number of
digits 2.3 Decodable number of digits
in the
enumeration mode.
12 UNSIGNED8 0 … 63 0
Number of
digits 2.4 Decodable number of digits
in the
enumeration mode.
13 UNSIGNED8 0 … 63 0
Number of
digits 2.5 Decodable number of digits
in the
enumeration mode.
14 UNSIGNED8 0 … 63 0
Reading reli-
ability 2 Min. reading reliability to be
achieved in order to output a
read code. 15 UNSIGNED8 1 … 100 4