Features
• Expansion Card that plugs into the Clare Security
PanelSupports button combinations
• Enables system to receive signals from Honeywell,
2GIG, GE, Napco & DSC sensorsSecure encrypted
wireless transmissions
• All sensor alarm, supervisory and trouble
signals are reported
• Dual antennas for reliable range
Installation
• Power down the Panel:
• Open cover
• Unplug battery cord
• Unplug power cord
• Insert the CS-WWT-10 into expansion slot 3 of the
Control Panel, gently inserting the connector and
snapping the stand-offs into place
• Connect battery cord, plug the power, and close
the cover to the panel
Use the panel installation guide to verify proper system setup.
IN
STALL
G
U I D E
I
CS-WWT-10 Wireless
Translator Module
Battery
Cord
Plug
Power
Cord
Plug
RE934ZT
Installed
in Panel
Expansion
Slot
3
