Lenovo Flex System x220, Инструкция по установке и обслуживанию

Страница: 653 / 714

Note: Before you close the cover, make sure that the air baffles and all components are installed
and seated correctly and that you have not left loose tools or parts inside the compute node.
000
000
000
000
000
0000000000
0000000000
0000000000
0000000000
0000000000
0000000000
0000000000
Release
button
Push point
Posts
Slots
Step 3. Hold the front of the compute node and slide the cover forward to the closed position, until it
clicks into place.
After you install the compute node cover, install the compute node into the chassis (see “Installing a compute
node in a chassis” on page 639 for instructions).
Removing the front handle
Use this information to remove the front handle.
Before you remove the front handle, complete the following steps:
1. Read “Safety” on page iii and “Installation guidelines” on page 637.
2. If the compute node is installed in an Flex System chassis, remove it (see “Removing a compute node
from a chassis” on page 639 for instructions).
3. Carefully lay the compute node on a flat, static-protective surface with the cover side down, orienting
the compute node with the bezel pointing toward you.
To remove the front handle, complete the following steps.
Chapter 7
.
Installing, removing, and replacing compute node components
645