Lenovo Flex System x220, Инструкция по установке и обслуживанию

Страница: 327 / 714

Complete the following steps:
1. Remove any recently installed components from the PCI expansion unit.
2. Try to power on the chassis.
– If the chassis successfully powers on, complete the following steps:
a. Check the ServerProven website to make sure that recently installed components are
compatible with the chassis.
b. Inspect the previously installed components for physical damage.
– If the chassis does not successfully power on or if this is not the first occurrence of this
problem, replace the PCI expansion unit.
[Peliminary]
• 80070217-2c04ffff : Sensor PEN MExp 4 Fault has transitioned to critical from a less severe state.
A problem was detected in the PEN Mzzanine Expansion adapter in I/O expansion connector 4. The
adapter is unable to initialize.
May also be shown as 800702172c04ffff or 0x800702172c04ffff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Other
SNMP Trap ID
50
CIM Information
Prefix: PLAT ID: 0522
User Response
Complete the following steps:
1. Remove any recently installed components from the PCI expansion unit.
2. Try to power on the chassis.
– If the chassis successfully powers on, complete the following steps:
a. Check the ServerProven website to make sure that recently installed components are
compatible with the chassis.
b. Inspect the previously installed components for physical damage.
Chapter 6
.
Troubleshooting
319