Lenovo Flex System x220, Инструкция по установке и обслуживанию

Страница: 35 / 714

– Recovery
Select this choice to view or change the system recovery parameters.
– POST Attempts
Select this choice to define the number of times to attempt POST before invoking the recovery
procedures.
– System Recovery
Select this choice to configure the recovery settings.
• POST Watchdog Timer
Select this choice to view or enable the POST watchdog timer.
• POST Watchdog Timer Value
Select this choice to view or set the POST loader watchdog timer value.
• Reboot System on NMI
Select this choice to enable or disable restarting the system whenever a nonmaskable interrupt
(NMI) occurs. The default is
Disable .
– Storage
Select this choice to view or change the storage device settings.
– Network
Select this choice to view or change the network device options, such as iSCSI.
– Driver Health
Select this choice to view the health status of the controllers as reported by the device drivers. You can
select to perform a repair action on a device driver.
• Date and Time
Select this choice to set the date and time for the compute node. The date is set in month / day / year
format. The time is set in 24-hour format ( hour : minute : second ).
This choice is on the full UEFI Setup utility menu only.
• Start Options
Select this choice to view or change the startup sequence. The startup sequence specifies the order in
which the compute node checks devices to find a boot record. The compute node starts from the first
boot record that it finds. If the compute node has Wake on LAN hardware and software and the operating
system supports Wake on LAN functions, you can specify a startup sequence for the Wake on LAN
functions. For example, you can define a startup sequence that checks for a disc in the CD or DVD drive,
then checks the hard disk drive, and then checks a network adapter.
This choice is on the full UEFI Setup utility menu only.
• Boot Manager
Select this choice to view, add, delete, or change the device boot priority, boot from a file, select a
one-time boot, or reset the boot order to the default setting.
Select Boot Modes to view or change the boot settings. You can set the boot mode and choose
UEFI operating-system support only, legacy operating-system support only, or UEFI and legacy
operating-system support.
Note: If you select the legacy-only boot mode (which makes boot time much faster), you will not be able
to activate any Features on Demand (FoD) keys.
• System Event Logs
Select this choice to access the System Event Manager, where you can view the POST event log and
the system-event log.
Chapter 2
.
Configuring
27