Kongsberg Simrad TV80, Справочное руководство

Страница: 60 / 356

58
406388/F
Defining the IP address on the computer's network adapter
The communication between the Processor Unit and the receiver and/or transceiver units
is made using a high speed Ethernet cable. You must define which IP Address and
Subnet mask the Ethernet adapter in the computer shall use for this communication. As
long as you do not replace the Processor Unit with another computer, or change the
network adapter, you only need to do this once.
Prerequisites
This procedure is made for the Microsoft
®
Windows
®
10 operating system. It is assumed
that you are familiar with this operating system.
Context
You will only need to set up the IP address on the Ethernet adapter if you are going to
communicate with an SR70 or SR15 Receiver Unit.
If you wish to connect your Processor Unit to a ship network, you must provide the
computer with two Ethernet adapters. Use one adapter for the communication with the
SR70 or SR15 Receiver Unit, and one for the local area network.
Procedure
1 Close all the programs that are running on the computer.
2 Open the
Network Connections
dialog box.
a In the bottom-left corner of your desktop, select the Windows ® search function.
b In the search box, type "Network Connections", and open the
Network
Connections
dialog box.
3 Define the IP address on the Ethernet adapter.
a Right-click the network adapter you are going to use and select
Properties
on the shortcut menu.
b On the list of connections, select
Internet Protocol 4 (TCP/IPv4)
, and then
Properties
.
c Select
Use the following IP address
, and type the IP address and network mask.
•
IP Address
: 192.168.1.30
•
Subnet mask
: 255.255.255.0
4 Select
OK
to save the selected settings, and then close all the dialog boxes.
Simrad TV80 Reference Manual