Kongsberg Simrad TV80, Справочное руководство

Страница: 203 / 356

406388/F
201
Creating a TrawlEye view
A
TrawlEye
view can contain an echogram or any other gauge showing data from a
specific TrawlEye sensor.
Prerequisites
A PX TrawlEye must be added to the system and configured.
There is at least one layout created. In this context, the different combinations of views
is called
layout .
Context
In a large system with many sensors in simultaneous use, it can be useful to have
different ways of having the information presented. According to the operating scenario
or your personal preferences, you can choose to edit the content of a view or creating a
new one and apply that selection to your current presentation.
The TV80 has a built-in gauges library with lots of visual elements that can be placed in
the sensor views. A gauge allows you to see the information you want from the sensor
you want and with the appearance you want. Each view contains one or more “gauges”.
Procedure
1 Select the area you want to create a new view for.
The active view is identified with a thicker border.
2 Move the cursor to the right side of the view.
The
View
shortcut menu opens.
3 Select
Edit View
.
The
Designer
module opens.
4 Select
Add
on the top bar of the Designer module to open the
Gauges
dialog box.
5 Select the
TrawlEye
tab.
6 Click on the gauge, hold the mouse button depressed, and drag it into in your view.
You can increase or decrease the size of a gauge by clicking on the bottom right
corner and dragging until you get the desired size.
Note
The properties and parameters of an echogram can only be changed from the
Active
menu.
7 Select
Save
and then
Close
to save all the parameters and close the Designer module.
Designer module