Kongsberg Simrad TV80, Справочное руководство

Страница: 72 / 356

70
406388/F
2 Choose the measurements you want your sensor to read and define the
relevant parameters accordingly.
3 Choose the communication channel.
4 Select the update interval.
5 Select the relevant value for output power.
6 If applicable, select
Calibrate Sensor
or
Unlock Measurements
to open the
proper dialog boxes.
c Select
Program Sensor
to transfer the chosen parameters to the sensor.
d Disconnect the sensor from the interface cable and the computer.
e Select
Close
to close the dialog box.
6 Select
No
if one of the following conditions is met:
• The sensor is mounted on the fishing gear.
• The sensor is not a PX family sensor.
• The sensor data is received using a third wire cable on a a FS system.
a Observe that the
Select Sensors
dialog box opens.
b On the gear illustration, select the location of your sensor.
c Define the sensor parameters.
1 Choose the measurements you want your sensor to read and define the
relevant parameters accordingly.
2 Choose the communication channel.
3 Select the update interval.
d Select
Close
to save the chosen settings and close the dialog box.
7 Repeat these steps for the next sensor.
Result
The new sensor appears on the
Sensor List
page.
The
Sensor List
page presents a table with all the catch monitoring sensors that have been
added to the system. You can see if they are currently in use or disabled. You can also
see relevant information about the sensors, such as type, receiver in use, communication
channel, and where they are placed on the fishing gear.
Related topics
Add New Sensor dialog box, page 284
Select Sensors dialog box, page 277
Sensor List page, page 234
Simrad TV80 Reference Manual