Kongsberg Simrad TV80, Справочное руководство

Страница: 151 / 356

406388/F
149
Enabling, disabling and removing sensors
Topics
Temporarily enabling or disabling a sensor from the presentation, page 149
Removing one or more sensors from the system, page 150
Temporarily enabling or disabling a sensor from the
presentation
The
Sensor List
page presents a table with all the catch monitoring sensors that have been
added to the system. In the
Sensor List
page you can choose a sensor and temporarily
disable it from the current presentation.
Prerequisites
The relevant catch monitoring sensors were attached to the fishing gear before it was
deployed.
You have selected the type of gear you wish to use. The serial and/or Ethernet ports have
been defined and configured in order to allow for communication with external hardware.
Context
Different catch monitoring sensor types may be used with the TV80. Depending on
the type of fisheries or on the current fishing scenario, you may not need to use all the
sensors you have previously configured. With
On Gear
you can decide if you want to
have the data from that sensor presented on your current presentation.
Procedure
1 On the
Setup
menu, select
Installation
.
Observe that the
Installation
dialog box opens.
2 In the
Sensor list
page, observe the sensor you want to temporarily remove from
your presentation.
3 Observe the
On Gear
check box at the right of the list.
A check mark in
On Gear
indicates that the data from that sensor is being presented.
When there is no check mark in
On Gear
, no data from the sensor is being presented.
4 Check
On Gear
to enable or disable the relevant sensor from the presentation.
Operating procedures