Kongsberg Simrad TV80, Справочное руководство

Страница: 287 / 356

406388/F
285
•
Yes
Select
Yes
if you have a new sensor that needs to be configured before use.
The sensor must be connected to the computer with a dedicated cable. Dedicated
dialog boxes are provided to configure the new sensor.
•
No
Select
No
if you have a new sensor that does not need to be configured before use.
You can choose the type of sensor to add from the menu that opens.
Once you have chosen the sensor you wish to use, you can place it on the fishing
gear. The
Select Sensors
dialog box is used to select which sensors to use, define
the frequency channels you wish to receive the information on, and how often this
information shall be received (update rate).
Related topics
Adding new catch monitoring sensors, page 110
Adding a new sensor that must be configured prior to use, page 114
Adding a new sensor that does not need configuration prior to use, page 112
Introduction to PX Sensors Configuration dialog boxes, page 259
Changing the configuration of a sensor, page 146
Entering the offset values for sensor measurements, page 146
Configuring a PX family sensor for an SR type receiver unit, page 137
Configuring and setting up the catch monitoring sensors for different measurements,
page 141
Adding more measurements to a PX family sensor, page 144
Overview of sensors channels and frequencies, page 309
Overview of catch monitoring measurements, page 312
Functions and dialog boxes