Kongsberg Simrad TV80, Справочное руководство

Страница: 117 / 356

406388/F
115
6 In the very first
PX Sensor Configurator
dialog box, select communication port
and sensor type, then select
Connect
.
The relevant sensor
Configurator
dialog box opens.
7 In the relevant configuration dialog box, select the operational parameters to suit
your preferences and fishing gear setup.
a On the gear illustration, select the location of your sensor.
b Choose the measurements you want your sensor to read and define the relevant
parameters accordingly.
c Choose the communication channel.
d Select the update interval.
e Select the relevant value for output power.
f If applicable, select
Calibrate Sensor
or
Unlock Measurements
to open the
proper dialog boxes.
8 Select
Program Sensor
to transfer the chosen parameters to the sensor.
9 Disconnect the sensor from the interface cable and the computer.
10 Select
Close
to close the dialog box.
Result
The new sensor appears on the
Sensor List
page.
The
Sensor List
page presents a table with all the catch monitoring sensors that have been
added to the system. You can see if they are currently in use or disabled. You can also
see relevant information about the sensors, such as type, receiver in use, communication
channel, and where they are placed on the fishing gear.
Related topics
Add New Sensor dialog box, page 284
Select Sensors dialog box, page 277
Operating procedures