Komatsu WA380-8, Руководство по эксплуатации и техническому обслуживанию

Страница: 171 / 432

REAR HEATED WIRE GLASS SWITCH
When pressing the switch for rear window glass with heated
wire, the rear heated wire glass is turned ON to clear the glass.
Position (A): ON (Clearing the glass)
Position (B): OFF
WORK EQUIPMENT LOCK SWITCH
k k
WARNING
• When leaving the operator's seat, be sure to lock the work equipment by pressing the work equip-
ment lock switch (the pilot lamp lights up). If the work equipment is not locked and the work equip-
ment control lever (A) is touched by mistake, it may lead to serious accident.
• If the work equipment is not securely locked, it can start moving and cause a serious personal in-
jury or death. Check that the pilot lamp is lit.
• Before operating the work equipment lock switch, make sure that work equipment control lever (A)
is in HOLD position.
• When operating the work equipment lock switch, be sure not to touch work equipment control lever
(A).
The work equipment lock switch is a device used to lock the
work equipment.
The work equipment is locked (the pilot lamp lights up) or un-
locked (the pilot lamp goes out) each time you press position
(B) of the switch.
If you release your hand from the switch, it automatically re-
turns to its original position.
Even if you may turn the starting switch to OFF position with
the work equipment unlocked (pilot lamp goes out), the work
equipment is locked (pilot lamp lights up) if you turn the starting
switch to ON position again.
GEAR SPEED SWITCH
The gear speed switch is used to change the gear speed of the machine.
OPERATION EXPLANATION OF COMPONENTS
3-107